iRiver iFP-120/iFP-140/iFP-180 MP3 Player Firmware v3.55 Manager Version Download

Improved Feature:--Improved to keep current setting after connecting to the PC as below. Did not write or change any data after connecting to the PC -> Current settings such as playback mode are not changed. Did write(delete/copy/move/change files) after connecting to the PC -> Current settings are initialized.

Fixed Bugs:-- Fixed the issue that reboots after displaying Delete error when adding a file, if over 100 tracks are programmed on the device.-- Fixed the issue that didn't keep Fade in setting when beep volume is changed to 0.-- Fixed the issue that didn't shuffle properly on Study mode with SFL D, DA on.-- Fixed the issue that didn't display certain ID3 tag in unicode correctly.-- Fixed the issue that didn't keep current setting after powering on and off when interval repeat or SFL was on.

How to upgrade firmware(iFP Series & N Series):--Please download the firmware file to your desktop at DOWNLOAD section.--After downloading the firmware file, please uncompress the file.You will get ".hex file".--Now, turn on your flash player and connect the player to your PC via the USB cable, then open 'iriver Music Manager '.--In iriver Music Manager, Go to Tools -> Firmware Upgrade in the menu.--After selecting 'Firmware upgrade', the Open box appears prompting you to open the upgrade file from the desktop (where you saved it.)--Your Flash Player will recognize the upgrade file(hex file) and start to upgrade.During the upgrade, the window below will pop up.--When the upgrade is finished, your flash player will power off automatically. Click 'OK' and make sure that the firmware version has been changed by using Firmware information on Help menu. (The player should be connected to the PC with a USB cable while you check the firmware version information.) Or you can confirm it on the screen of remote when you power on the player.

iRiver iFP-120/iFP-140/iFP-180 MP3 Player Firmware v3.55 Manager Version